Genuine Motorcycle Parts Logo

You are looking at Enfield Bullet 500 Classic

Which parts are you looking for?

Enfield Bullet 500 Classic Parts

Engine and Transmission

The Enfield Bullet 500 Classic is a 4 stroke, Classic bike with a Air cooled 499.00 ccm (30,30 cubic inches) Single cylinder type of engine. This engine then gets the power to the rear wheel with a Chain driven transmission.

This engine has 22.00 HP (16,02 kW)) @ 5400 RPM and a top speed of 125.0 km/h (77,31 mph)

Fuel System

When out on the road, the fuel capacity is a key factor. The Enfield Bullet 500 Classic is fitted with a 14.50 litres (3,81 gallons) fuel tank and uses a OHV fuel management system, offering good mileage on the road.

Maintenance and Service

Scheduled maintenance is necessary to maintain your Enfield Bullet 500 Classic operating reliably. Essential service parts consist of sprockets. Through proper maintenance, your Bullet 500 Classic can keep delivering reliable service over the long term.

Loading products...

Loading...

Wheels and Tyres

If you are looking for Enfield Bullet 500 Classic Tyres then you will need to look for the right sizes. On this model the Front Tyre size is 3.25 - 19 and the Rear Tyre size is 3.50 - 19 so before going ahead and buying a tyre, make sure that it is the right size.

Enfield Bullet 500 Classic Technical Specifications

Type: Single cylinder
Displacement: 499.00 ccm (30,30 cubic inches)
Power: 22.00 HP (16,02 kW)) @ 5400 RPM
Torque: N/A
Compression: 6.5:1
Stroke: 4
Cooling: Air
Valves: N/A
Starter: Kick
Transmission: Chain
Gearbox: 5 - speed
Top Speed: 125.0 km/h (77,31 mph)
Fuel Capacity: 14.50 litres (3,81 gallons)
Fuel Control: OHV
Type: Classic
Year: 2007
Weight: 168.0 kg (368,55 pounds)
Length: 2110 mm (82,68 inches)
Front Brakes: Expanding brake (drum brake)
Rear Brakes: Expanding brake (drum brake)

Common Questions About Enfield Bullet 500 Classic Parts

The most frequently replaced parts for the Enfield Bullet 500 Classic include air filters, oil filters, brake pads, chain and sprockets, and clutch components. Based on owner experiences, specific components like Bullet Classic 500 may also require occasional replacement.
Many parts for the Enfield Bullet 500 Classic are readily available through our suppliers. Common searches from owners include Wiring Harness Classic 500 Royal Enfield 2012 Model, Bullet 500 Classic Tyre Size, Bullet 500 Tyres, which we stock regularly.
The Enfield Bullet 500 Classic benefits from regular service intervals. Oil changes are typically recommended every 3,000-5,000 miles, with more comprehensive service including inspection of Bullet Classic 500 recommended at 10,000 miles intervals.

Quick Find

Search

Manufacturers